Plan Your Project

You want clean, defined wood edging without digging trenches.

You're working with standard dimensional lumber (2x2, 2x3, 2x4, 2x6).

You want edging that holds its position but can be adjusted over time.

You like the option to remove, reset, or reuse materials as your landscape evolves.

Your soil is workable. Quick test: if you can push a screwdriver a few inches in without much force, you're in good shape.

You're not planning to use 2x lumber (or 2x recycled plastic lumber) as your edging material.

Your soil has an existing compacted base of rock, gravel, or sand — such as along a pathway that was originally built on a prepared base. In these cases, the staples can bend before reaching stable soil.

Your soil is extremely compacted (hardpan clay, caliche, or desert hardpack) and pre-watering the area 24–48 hours before installation isn't practical for your situation.

There's more to know: Read more about soil and site conditions and how 2xEDGE customers have navigated issues they've encountered during edging installation projects.

Arid or dry climates: Many customers in desert climates install 2xEDGE staples successfully but soil condition on installation day matters a lot. If your ground is bone-dry, a deep watering 24-48 hours before you install can make a significant difference. Dry soil that feels like concrete will soften enough to accept a staple after a good soak. If pre-watering isn't practical for your situation, 2xEDGE may not be the right product for your project.

Rocky soil, tree roots, or buried debris can make staple placement more challenging in certain spots. In these cases, it’s common to shift a staple slightly until you find clear ground.

Installations next to poured concrete, such as sidewalks, walkways, or parking strips can sometimes limit where staples can be placed due to hardened concrete beyond the visible edge. This may result in uneven staple spacing, which is normal and does not affect performance.